Technol Logo   Teraoka Logo
        House Brand          Authorized Distributor
[Select your language: ENGLISH | 中文 ]
   

TECHNOL - POLYIMIDE FILMS

| TECHNOL | TERAOKA |

HOME >> PRODUCTS >> TECHNOL >> POLYIMIDE FILMS

Technol's High Quality Polymide Films comes in various dimensions to cater to various application. Highly resistible to extreme temperatures to provide functionality during application.

Download

Technical Specifications Comparison Chart PDF (Not Available)

 

 

* Click Product Code to view Technical Data Sheet

Type      Description   Application
PA 90 Excellent combination of mechanical, physical, chemical and electrical properties; Withstand a wide range of temperature ranging from -269°C (-452°F ) to 400°C (752°F).  Self-extinguishing and non-melting Flex printed circuits, motor slot liners, magnetic wire insulation, dielectric layers for IC packaging, TABs (Tape Automated Bonding), protection layer in electronics, and backing material for polyimide tape, etc
PD 90 Beside all the properties PA 90  has, PD 90 and PE 90 are extremely good in dimensional stability FCCL, coverlay, voice coils, flexible circuits
PE 90
PF 90 PA 90 Polyimide film laminated with teflon  Magnet wire insulation, release film
1. PA 90, PD 90, PE 90, PF 90 PI Film Grade   
Product No. Thickness (mils) g/m2 Density
PA 90/#50 0.5 18+/- 2
PA 90/#100,  PD 90/#100,  PE90/#100 1 35 +/- 5
PA 90/#200, PD 90/#200,  PE90/#200, PF 90 #200/919 2 71.5+/-5
PA 90/#300, PD 90/#300,  PE 90/#300 3 106+/-7
PA 90/#400 4 142+/-10
PA 90/#500 5 179+/- 13
PA 90/#600 0 213+/-15
PA 90/#700 7 250+/-18
PA 90/#800 8 285+/-20
PA 90/#900 9 322+/-22
PA 90/#1000 10 357+/-25
2. Mechanical and Electrical  Properties 
Properties Units             Typical Value   Testing Condition Test Method
  (%) (%) (%)
Tensile Strength MD Mpa  180 23°C ASTM D-882
TD 160
Elongation MD % 90 23°C ASTM D-882
TD 87
(PA 90, PF 90) Shrinkage % 0.2 200°C, 2hr IPC-TM-650  2.2.4A
Dielectric Strength KV/mm 200 60Hz, 23°C ASTM D-149
Volume Resistibility Ω - cm 1.1 x 10 13 500V, 23°C5 ASTM D-257
Dissipation Factor - 0.009 1kHz, 23°C ASTM D-150
Dielectric Constant - 3.5 1kHz, 23°C ASTM D-150
Surface Resistibility Ω  1.2 x 10 14 500V, 23°C ASTM D-257
Properties of  PD 90, PE 90 Thermal PI Film 
 
Properties Units             Typical Value
PD 90         PE90  
Testing Condition Test Method
Shrinkage %       0.07           0.05 200°C, 2hr IPC-TM-650  2.2.4A
Coefficient of Thermal Expansion ppm/°C        12               9 30-100°C TMA Method
       20              16 100-200°C
       27              19 200-300°C
       25              17 30-300°C
Properties PF 90 PTFE / PI Film   
 
Properties Units             Typical Value  
PF 90 #120/616B PF 90 #150/019 PF 90 #200/919
Thickness mil 1.2 1.5 2
Tensile Strength Mpa 150 160 180
Elongation % 83 87 90
Heat Seal Strength Film to film kg/25mm 1.4 1.4 1.6
Film to copper 1.3 1.4 1.5
Breakdown Voltage KV/mm 203 212 224
Tensile Strength -Strain Curve (Technol PA 90 Film, 1mil thickness) Thermal Degradation (Technol PA 90, PF90 film, 1mil thickness heat rate: 10°C/min, in the air atmosphere)
*Polyimide Film Suppliers Cross Reference
Technol ? Kapton ? Toray DuPont Kapton ? E I DuPont Apical ? Allied-Apical
PA 90 HN HN AV
PD 90, PE 90 EN VN NP
PF 90 - FN AF








.





百人牛牛下载