Technol Logo   Teraoka Logo
        House Brand          Authorized Distributor
[Select your language: ENGLISH | 中文 ]
   

TECHNOL - PRINTED CIRCUIT BOARD TAPES

| TECHNOLTERAOKA |

HOME >> PRODUCTS >> TECHNOL >> PRINTED CIRCUIT BOARD TAPES

 

Our  company  manufactures  and  supplies  many  kinds  of  PCB  tape. They  are  specially formulated  and  designed  to  meet  the  requirements  for the  advanced printed circuit board technologies  in  the  process  of  hot  air leveling, gold plating and wave soldering. Our tapes have  good  adhesive  strength,  excellent  heat  resistant,  chemical  resistant  properties,  and without leaving any adhesive residue.

 

 

PCB HOT AIR LEVELING TAPES
Product Code Backing  Adhesive Total Thickness Adhesion Strength Tensile Strength Elongation Temp. Resistant Application
(mm) (kg/25mm) (kg/25mm) % (oC)
TN 823 Red (white)Flat Back Paper /PET Silicone 0.21 1.25 32 6 260 Protect gold finger contacts during the hot air leveling process. (horizontal  & vertical)
(Short Term)
TN 833 Red Flat Back Paper /PET Silicone 0.24 1.25 35 7 260
(Short Term)
PCB GOLD PLATING TAPES
Product Code Backing Adhesive Total Thickness Adhesion Strength Tensile Strength Elongation Temp. Resistant Application
(mm) (kg/25mm) (kg/25mm) % (oC)
TN 226 PVC Rubber 0.11 0.1 5 150 - Mask PCB during electroplating process to prevent contamination by plating solution.
TN 280 PET Silicone 0.072 0.8 9 70 200 Protect the other area of  PCB during the gold plating of the ‘fingers’. 
PCB WAVE SOLDERING TAPES
Product Code Backing Adhesive Total Thickness Adhesion Strength Tensile Strength Elongation Temp. Resistant Application
(mm) (kg/25mm) (kg/25mm) % (oC)
TN 275   Silicone 0.06 0.5 7.5 50 400 High heat-resisting insulation purpose and extreme high temp protection up to 400oC
PI Film
TN 276 PI film   Silicone 0.065 0.6 7.5 50 270 ESD type, extremely low electrostatic discharge at unwind and removal from PWB
(short term)
TN 278 PI film   Silicone 0.06 0.5 7.5 50 260 Protect specific areas of PCB, normally the edge connector, during the wave soldering process
(short term)
FPC Tapes
Product Code Backing Adhesive Total Thickness Adhesion Strength Tensile Strength Elongation Temp. Resistant Application
(mm) (kg/25mm) (kg/25mm) % (oC)
TN 225 PVC Rubber 0.08 0.035 5 200 - Ideal for protecting FPC
TN 238 PVC  Rubber 0.08 0.03 4.5 100 - Ideal for protecting FPC
TN 239 PVC   Acrylic 0.09 0.24 4.5 100 - With liner








.





百人牛牛下载